服務熱線電話
400-6188-756
使用清洗機時水壓不夠怎么解決?
來源:http://m.formulascan.com/ 時間: 2023-02-13 瀏覽次數: 0
一.超聲波清洗機高壓噴嘴磨損嚴重,高壓噴嘴過度磨損會影響設備出水壓力,應及時更換新噴嘴。
1、 The high pressure nozzle of the ultrasonic cleaner is seriously worn. Excessive wear of the high pressure nozzle will affect the outlet pressure of the equipment, and the nozzle should be replaced in time.
二.進水流量不足導致水流不足,導致輸出壓力不足。應及時提供足夠的進水流量,以解決出水壓力降低的問題。
2、 Insufficient inlet flow leads to insufficient water flow and insufficient output pressure. Sufficient inlet flow shall be provided in time to solve the problem of outlet pressure reduction.
三.超聲波清洗機清空氣清洗進水過濾器,清洗進水過濾器內的空氣后,保證輸出標準的出水壓力。
3、 The ultrasonic cleaner cleans the inlet filter with clean air. After cleaning the air in the inlet filter, ensure the output standard outlet pressure.
四.超聲波清洗機溢流閥老化后,水溢流量大,壓力低,發現老化時應及時更換附件。
4、 After the overflow valve of the ultrasonic cleaner is aged, the water overflow flow is large and the pressure is low. In case of aging, the accessories should be replaced in time.
五.超聲波清洗機高低壓水封和進出水單向閥泄漏導致工作壓力降低,應及時更換。
5、 The leakage of the high and low pressure water seals and the water inlet and outlet one-way valves of the ultrasonic cleaner causes the working pressure to be reduced, which should be replaced in time.

六.高壓管.過濾裝置扭結.彎曲或損壞,導致水流不暢,導致出水壓力不足,應及時修復。
6、 The high-pressure pipe and filter device are kinked, bent or damaged, resulting in poor water flow and insufficient outlet pressure, which should be repaired in time.
七.高壓泵內部故障,易損件磨損,水流減小;設備內部管道堵塞,水流過小,導致工作壓力過低。
7、 Internal failure of high-pressure pump, wear of vulnerable parts and decrease of water flow; The internal pipeline of the equipment is blocked and the water flow is too small, resulting in low working pressure.
清洗機用于沖洗過濾液壓系統.裝配.污染物在使用和維護過程中產生或侵入;也可用于定期維護和過濾工作油,提高清潔度,避免或減少污染引起的故障,確保液壓系統設備的高性能.高可靠性和長壽命。
The cleaning machine is used to wash and filter the hydraulic system. The pollutants generated or invaded during use and maintenance; It can also be used to regularly maintain and filter the working oil, improve the cleanliness, avoid or reduce the failure caused by pollution, and ensure the high performance, high reliability and long life of the hydraulic system equipment.
本文由多槽手動超聲波清洗機整理發布,您是不是對這些內容有所了解了呢?更多的內容請點擊:http://m.formulascan.com 我們會有更多精彩內容等你查看。
This article is organized and released by the multi-slot manual ultrasonic cleaning machine. Do you know something about these contents? For more information, please click: http://m.formulascan.com We will have more wonderful content waiting for you to check.
1、 The high pressure nozzle of the ultrasonic cleaner is seriously worn. Excessive wear of the high pressure nozzle will affect the outlet pressure of the equipment, and the nozzle should be replaced in time.
二.進水流量不足導致水流不足,導致輸出壓力不足。應及時提供足夠的進水流量,以解決出水壓力降低的問題。
2、 Insufficient inlet flow leads to insufficient water flow and insufficient output pressure. Sufficient inlet flow shall be provided in time to solve the problem of outlet pressure reduction.
三.超聲波清洗機清空氣清洗進水過濾器,清洗進水過濾器內的空氣后,保證輸出標準的出水壓力。
3、 The ultrasonic cleaner cleans the inlet filter with clean air. After cleaning the air in the inlet filter, ensure the output standard outlet pressure.
四.超聲波清洗機溢流閥老化后,水溢流量大,壓力低,發現老化時應及時更換附件。
4、 After the overflow valve of the ultrasonic cleaner is aged, the water overflow flow is large and the pressure is low. In case of aging, the accessories should be replaced in time.
五.超聲波清洗機高低壓水封和進出水單向閥泄漏導致工作壓力降低,應及時更換。
5、 The leakage of the high and low pressure water seals and the water inlet and outlet one-way valves of the ultrasonic cleaner causes the working pressure to be reduced, which should be replaced in time.

六.高壓管.過濾裝置扭結.彎曲或損壞,導致水流不暢,導致出水壓力不足,應及時修復。
6、 The high-pressure pipe and filter device are kinked, bent or damaged, resulting in poor water flow and insufficient outlet pressure, which should be repaired in time.
七.高壓泵內部故障,易損件磨損,水流減小;設備內部管道堵塞,水流過小,導致工作壓力過低。
7、 Internal failure of high-pressure pump, wear of vulnerable parts and decrease of water flow; The internal pipeline of the equipment is blocked and the water flow is too small, resulting in low working pressure.
清洗機用于沖洗過濾液壓系統.裝配.污染物在使用和維護過程中產生或侵入;也可用于定期維護和過濾工作油,提高清潔度,避免或減少污染引起的故障,確保液壓系統設備的高性能.高可靠性和長壽命。
The cleaning machine is used to wash and filter the hydraulic system. The pollutants generated or invaded during use and maintenance; It can also be used to regularly maintain and filter the working oil, improve the cleanliness, avoid or reduce the failure caused by pollution, and ensure the high performance, high reliability and long life of the hydraulic system equipment.
本文由多槽手動超聲波清洗機整理發布,您是不是對這些內容有所了解了呢?更多的內容請點擊:http://m.formulascan.com 我們會有更多精彩內容等你查看。
This article is organized and released by the multi-slot manual ultrasonic cleaning machine. Do you know something about these contents? For more information, please click: http://m.formulascan.com We will have more wonderful content waiting for you to check.
相關文章
-
噴淋清洗機適配性指南:清洗劑與材質的科學匹配 2025-06-07
-
低溫廢水回收設備:熱量遷移與相變轉化的協同機制 2025-06-06
-
超聲波清洗機:工業污漬的“終極克星” 2025-06-05
-
全自動與半自動超聲波清洗機的技術解析與應用選擇 2025-06-04
-
噴淋清洗機適用在哪些方面? 2025-06-03
-
工業清洗領域單工位旋轉噴淋清洗機的構造與原理揭秘 2025-05-27
-
工業級網帶通過式清洗機連續高效清洗解決方案 2025-05-26
-
金屬飛邊克星!工業高壓噴淋清洗機如何像切黃油一樣除掉毛刺? 2025-05-22
-
多槽手動超聲波清洗機:多槽獨立計時器精準控制各環節解析 2025-05-20
-
全自動超聲波清洗機:精密電子元件的微觀潔凈藝術家 2025-05-19